Tatting 57 - Bride's Garter and Bookmarks

A bride's garter done in machine embroidery tatting!  Plus I have 3 sizes of bookmarks done 2 ways.

For All Hoop Sizes

Completely free-standing tatting designs!  These designs are done so you can add a ribbon to make a bookmark.  Incredibly easy to do!  For the tatting, just stitch and rinse!  That is all there is to do it!
I did these in 3 sizes.  The small size fits a 4x4 inch (100x100 mm) hoop size.  All of them fit a 5x7 inch (130x180 mm hoop.

A closer look at the tatting garter I made.  This is available for all hoop sizes.  I include instructions to help you stitch out a beautiful garter just like I did in this picture.

For this one, I used a 100 wt. (very fine) silk thread.  You can use regular weight (40 wt.) for this too.  I like how delicate it looks.  The satin-covered elastic is 1/2 inch wide.

You can add Mylar to these, which is really fun and easy to do. I added ribbons to a few of mine.

For more information click on the link below!

Tatting 57 - Bride's Garter and Bookmarks

Tatting 126 - Icicle Earrings

Free-standing machine embroidery tatted Icicle Earring designs done in the machine embroidery hoop! VERY EASY!

For 4 inch (100x100 mm) hoops and larger

These designs are VERY EASY to stitch!  Just stitch on wash away stabilizer, rinse and dry flat.  Add crystals, if desired, to the designs that are made to accommodate them.They are about 1-1/2 inches tall.

For more information click on the link below!

Tatting 126 - Icicle Earrings 

Tatting 85 - "Little Sister" Angels

Free-standing machine embroidery tatting angels done in the hoop!  I have them done in 6 ways. VERY EASY

For 4x4 inch hoops.

These angels are about 2-3/4 inches tall.  These are the little sisters to the 4-inch Tatting 83 Angels.

These angles are done 6 ways.  One is done without a halo (like her naughty sister), one has a halo and is "plain".  Three different styles of Mylar and one is done with crystals.  All  designs on this page are completely free standing.  

These are free-standing designs.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.


For more information click on the link below!

Tatting 85 - "Little Sister" Angels

Tatting 82 - Snowflake Garland

Free-standing machine embroidery tatting snowflake garlands done in the hoop!  I have them done in 2 ways. VERY EASY!

For 5x7 inch (130x180 mm) hoops and larger.

Snowflake singles are for 4x4 inch hoops.

These snowflakes are 3 different sizes.  I have them as continuous garlands that can be sewn or glued into your projects, I have them as separate snowflakes and I have a string to use the separate snowflakes as hanging decorations.  All  designs on this page are completely free standing.

The small size of the designs are about 1-1/2 inches tall, the medium size is about 2 inches tall and the large size is about 2-3/4 inches tall.

These are free-standing designs.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set. I used metallic thread on the Snowflakes below.

For more information click on the link below!

Tatting 82 - Snowflake Garland

Tatting 111 - Suncatcher

Free-standing machine embroidery Tatted Suncatcher designs done in the machine embroidery hoop!  These coordinate with the Tatting 103 and Tatting 108 designs. VERY EASY!

For 4x4 inch (100x100 mm) hoops or larger

Completely free-standing Tatted Suncatchers & ties - 5 different designs. 

One is "plain", one done with Mylar, one with lace done with 2 colors & one with a single color with lace.


I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.

I made this fun spinner card with the "plain" Suncatcher.  It might be a little hard for you to see the angles of the card.  I will wind up the invisible string that I attached to the end picot and the edge of the card.  When the card is opened, the Suncatcher will spin around.  These designs can be used many different ways.  You can even use them as a doily.

Tatting 72 - Snow Crystals

Tatting snow crystals!  I have them done 8 different ways.  They are about 3 inches wide.  VERY EASY! 

For 4x4 inch (100x100 mm) hoops and larger.

3-inch Snow Crystals!  Some are done with Mylar, some are done with crystals, some are done with Mylar and crystals and some are done plain.  I have them with less picots and with more picots - 8 different ways!   All  tatting is completely free standing. 

These free-standing designs are so easy to do!  Just stitch and rinse.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.



For more information click on the link below!

Tatting 72 - Snow Crystals

Tatting 113 - Christmas Tree Garlands

Free-standing machine embroidery CONTINUOUS tatting Christmas tree garlands!  Make them as long as you want. Some can be done with Mylar and some with crystals.

For 4x4 inch (100x100 mm) hoops and larger.

THESE WORK GREAT IN BORDER OR ENDLESS HOOPS!

Christmas trees that are garlands!   Mix and match!  All pieces can be joined together.  Make them as long as you want.  They are done plain, with Mylar or done with hot fix crystals (or metals) and all have the star at the top.  I have extra garland pieces too with and without the stars.  All  tatting is completely free standing.
These are free-standing designs.  EASY.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.

For more information click on the link below!

Tatting 113 - Christmas Tree Garlands

Tatting 86 - Tatted Earrings

Completely free-standing tatting designs done in the machine embroidery hoop! These are VERY EASY!

These earrings are small - about 1 inch tall.  

These are done 6 ways.  One single color plain, one 2 colors plain, one with Mylar (single color), one with Mylar (2 colors) and two are done with crystals (single color and 2 colors).  I put two of the earrings in each design for you and sorted the colors for those that are more than one color.  A pair takes about 4 minutes to stitch!

These are free-standing designs.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.




For more information click on the link below!

Tatting 86 - Tatted Earrings

Tatting 74 - Square Snow Crystals

Machine Embroidery tatting snow crystals!  I have them done 8 different ways.  They are about 2-1/2 inches square.  VERY EASY! For 4x4 inch (100x100 mm) hoops and larger.2-1/2-inch Snow Crystals!  Some are done with Mylar, some are done with crystals, some are done with Mylar and crystals and some are done plain.  I have them with less picots and with more picots - 8 different ways!   All  tatting is completely free standing. 

These free-standing designs are so easy to do!  Just stitch and rinse.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.   

For more information click on the link below!
Tatting 74 - Square Snow Crystals

Tatting 35 - Angels

 Free-standing machine embroidery tatting Angels done in the machine embroidery hoop!  These are easy for you to stitch out.  Complete instructions included.  No jump stitches!

For 5x7 (130 x 180 mm) hoops & larger

All free-standing tatting angels.  I used a metallic thread for the halo.  Each has a hole for a hanger.  You'll want to block these and keep them a bit stiff when you soak out the stabilizer.

These designs use regular weight embroidery thread

There are 3 sizes for the 5x7 inch (130x180mm) hoops or larger

• Small fits the 5x7 inch hoops
• Medium fits the 6x10 inch (150x240 or 160x260mm) hoops
• and Large which fits the 7x12 inch or 8 inch hoops (180x300 or 200x200mm)

For more information click on the link below!

Tatting 75 - Angels

Tatting 78 - 3 Inch Snowflake

Machine embroidery tatted snowflakes!  I have them done 8 different ways.  They are about 3 inches tall.  They coordinate with the Tatting 76 designs.  VERY EASY! 

For 4x4 inch (100x100 mm) hoops and larger.

3-inch Snowflakes!  Some are done with Mylar, some are done with crystals, some are done with Mylar and crystals and some are done plain.  I have them with less picots and with more picots - 8 different ways!   All  tatting is completely free standing.

For more information click on the link below!

Tatting 78 - 3 Inch Snowflake

Tatting 83 - Angels

Free-standing machine embroidery tatting angels done in the hoop!  I have them done in 5 ways. These are VERY EASY to do.

For 4x4 inch hoops

These angles are done 5 ways.  One is done without a halo (naughty angel?), one has a halo and is "plain".  Two different styles of Mylar and one is done with crystals.  All  designs on this page are completely free standing.  All are 4 inches tall. I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.

For more information click the link below!

Tatting 83 - Angel

Tatting 37 - Wreaths

Free-standing machine embroidery tatting wreaths done in the machine embroidery hoop!  These are easy for you to stitch out.Some have MYLAR.  No jump stitches!

For 4x4 inch (100x100 mm) hoops & larger

I added ribbon and hot-fix crystals to the wreaths above, using regular weight thread. For the wreaths below I used Mylar and metallic thread. All are very easy and fun to do.

For more information click on the link below!

Tatting 37 - Wreaths

Tatting 61 - Star Earrings

Free-standing machine embroidery tatting earrings!  These are easy for you to stitch out in your embroidery machine. One even uses Mylar! 

Made for the 4x4 inch hoops.  

These are fairly small, about the size of a US quarter.  They Mylar makes it look like there are tiny jewels inside!

Here is a closer view to see all 3 styles.The one on the left is meant to be free standing.  The middle one is done with Mylar.  The one on the right is done to accommodate hot fix crystals.

For more information click the link below!

Tatting 61 - Star Earrings

Tatting 79 - Christmas Ball Covers

Machine embroidery tatting Christmas Ball Covers! I have them done 3 different ways in 2 sizes - a total of 6 in all. For 5x7 inch (130x180mm) hoops and larger.

 I have them done in 2 sizes for 2-1/2 inch balls and for 3 inch balls. This design adds some elegance to the regular Christmas Tree balls.

These are free-standing designs.  Some assembly required. I include a design so you can stitch it out to weave the parts together.  I even used some of it for a tassel. Using the pear crystals really show off the shape of the tatting leaf clovers.


For more information click the link below.

Tatting 79 - Christmas Ball Covers.

Tatting 80 - Christmas Trees

Free-Standing machine embroidery tatting Christmas trees!  I have them done in 2 sizes - a total of 5 in all. EASY. 

For 4x4 inch (100x100 mm) hoops and larger.


They are done plain, with Mylar (both sizes) and the small one is also done with hot fix crystals or metals.


For more information on these designs, click the link below!

Tatting 80 - Christmas Trees

Tatting 39 - Tatted Star

Free-standing tatting stars done in the machine embroidery hoop!  These are easy for you to stitch out.  Complete instructions included.  Some are done with Mylar! For 4x4 inch (100x100 mm) hoops & larger

Tatted Star - so easy to make.  These designs are available so you can stitch with or without Mylar. They make elegant crafts and gifts.

For more information, click the link below.

Tatting 39 - Tatted Star

Tatting 26 - Crosses - Fine Threads

Tatting cross done in the machine embroidery hoop!  These are easy for you to stitch out and have free-standing tatting. These come in 3 sizes. All for 4x4 inch (100x100mm) Hoop size or larger. Add a tassel for a lovely bookmark or place in a card to someone special.

For more information click the link below.

Tatting 26 - Crosses - Fine Threads

Tatting 81 - Christmas Tree Earrings

EASY.

Free-standing machine embroidery tatting Christmas tree earrings!  I have them done in 2 sizes - a total of 8 in all.  Some are done with crystals and some with mylar. These are all free-standing designs. They can be used as earrings, pendants, and ornaments. 

More information in the link below. 

Tatting 81 - Christmas Tree Earrings

Tatting 123 - Icicles

VERY EASY!

Machine embroidery Tatting Icicles!  I have them done 5 different ways and 2 sizes. Some are done with Mylar, some are done with crystals, some are done with Mylar and crystals and some are done plain.  All tatting is completely free standing. 
All fit the 4x4 inch (100x100mm) hoop size, so everybody can do these!
These Icicles coordinate with Tatting 76 and Tatting 78

For more information on this design, click on the link below!

Tatting 123 - Icicles

Tatting 125 - Message Angels 3

VERY EASY!    

The new designs are Message Angels 3! These designs are done several ways. The message area is bigger. I have them with Christmas greetings. All are done with and with out crystals. I also have them done as "blanks" so you can add your own letters. Plus I have them done with fabric!

For more information click the link below!

Tatting 125 - Message Angles 3

Tatting DVD

Want to learn how to work with my machine embroidery tatting designs?  This video will teach you how!
Learn how to use my tatting designs.  I demonstrate how to-

1.  Stitch on wash-away stabilizer.  
2.  How to stitch onto Mulberry paper.  
3.  I show you how to add a template to make a doily.  
4.  I show you how to make long strips of tatting pieces using my designs.  No need to hand stitch the pieces together because I have "joining" stitches built right into the designs!  
5.  I demonstrate how to stitch directly onto your fabric.
6.  I show you how to conserve your stabilizer.
7.  And much, much more!

For more information click the link below! 
Tatting DVD